manualshive.com logo in svg

Proximus 5025, User Manual, Page: 72 / 216

Share
Download
Proximus 5025 User Manual Download Page 72

Key Functions

70

Feature Overview

Volume Control Keys

Adjust the volume for the handset, ringer and speaker. 

The volume control keys enable the following functions.

●

They adjust the handset volume when making a call via the handset.

●

They adjust the volume of the headphones of a headset.

●

They adjust the volume of the ringer tone during a call.

●

They adjust the volume of the loudspeaker during open-listening/hands-
free mode.

This setting is stored immediately and will be active for all future calls.

Redial Key

 (Forum IPhone 5010) / 

 (Forum IPhone 5020/5025/5030/

5040): redials previously dialled numbers.

Key LED

On the Forum IPhone 5025/5030/5040 the key LED s without a function. 
This is also the case if you configure the 

Redial

 feature on a programmable 

key with LED. 

Caller List Key

 (Forum IPhone 5010) / 

 (Forum IPhone 5020/5025/5030/

5040): opens the list of missed calls (see page 175). 

Key LED

On the Forum IPhone 5025/5030/5040 the LED of the caller list key 

 

flashes if you have received new missed calls.

  Key layout on the Forum IPhone 5010 

 

Key layout on the Forum IPhone 5020 

  Key layout on the Forum IPhone 5025/5030/5040

Summary of Contents for 5025

























































































































































































































Reviews:

No comments