Connecting to the Network
24
Installing the Telephone
Shared Network Connection
To connect a network device (such as a computer) to the phone, connect an
Ethernet cable into the network port on the back of the phone marked with
the
symbol. Plug the other end of the Ethernet cable into the network
jack on the network device for which you are sharing the network connection.
Notes
1.
The PC jack on the SIP system telephone does not supply inline power
onto other network devices.
2.
All Ethernet cables used must be minimum Category 5/5e straight-
through cables.
Connecting to Power
Power Adapter
Use the power adapter (sold separately) with your phone and plug your
phone into a power source.
Please note:
For power, use only the plug-in power supply unit with the part
no. 90046892 (sold separately) to connect the telephone to a
power source.
Inline Power
If your network provides 802.3af compliant inline power, the phone is
powered through the network.
1.
On the back of your phone, connect an Ethernet cable into the network
port marked with the
symbol.
2.
Plug the other end of the Ethernet cable directly into the network jack on
the wall.