Proximus 5025 User Manual Download Page 187

Page: 187 / 216

Main Menu

Menus at Your SIP System Telephone

185

Operation at the Forum IPhone 5040

Select an entry from the list. Press one of the following softkeys.

Delete all

: All received messages are deleted after a confir-

mation prompt.

Delete

: The message is deleted.

Show

: You will see the short message with receive date and

time.

Forward

: You can edit the message and then forward it to

another user. If required, edit the message. Confirm the
modified text with the

softkey. Enter the internal

call number of the user to whom you would like to forward
the message. Confirm the input of the call number with
the

softkey. The message will be sent.

Outgoing mail

: Short messages sent by you are displayed. These

messages can also be displayed, forwarded or deleted as
described in the previous section.

New message

: You can send a message to another user.

Operation at the Forum IPhone 5010/5020

Message

: Enter the text (max. 160 characters).

–

key: You confirm the input.

–

key: You delete the character left of the cursor.

No.

: Enter the internal call number of the user to whom you

would like to sent the message.

–

key: You confirm your input. The message will be

sent.

–

key: You delete the character left of the cursor.

Operation at the Forum IPhone 5025/5030

Message

: Enter the text (max. 160 characters).

–

softkey: You confirm the input.

–

Delete

softkey: You delete the character left of the

cursor.

– Softkey

ABC/abc/123

: You switch the character input

mode.

Summary of Contents for 5025

























































































































































































































Search results

Summary of Contents for 5025

Reviews:

Related manuals for 5025

Brands by name

Popular brands

Proximus 5025, User Manual

Search results

Summary of Contents for 5025

Reviews:

Related manuals for 5025

Brands by name

Popular brands