Proximus 5025 User Manual Download Page 103

Page: 103 / 216

Administration Tasks

Configuring the Telephone

101

Forum IPhone 5025/5030/5040
1.

In the device menu, select

Display

The

Screen Saver Timer

option allows you to configure the amount of

time (in seconds) the phone must be idle before the screen saver initiates. If
the value is set to “0” the screen saver is disabled.

The

Brightness Level

option allows you to set the amount of light that

illuminates the LCD display during

activity

. To decrease or increase the

brightness, press the or key (Forum IPhone 5025/5030) or on the

arrow keys (Forum IPhone 5040).

Tip:

You can set the brightness during a

period of inactivity

in the menu

Configurator > Telephony > Devices > System phones

The

Brightness Timer

option allows you to set the amount of time you

want the LCD display to stay illuminated before turning the backlight off
during a period of inactivity. For example, if you set the brightness timer to
“60”, when the phone reaches 60 seconds of inactivity, the LCD backlight
goes off.

Administration Tasks

Retrieving Status Information

You can retrieve information on the firmware and the network settings.

Forum IPhone 5010/5020
1.

In the device menu, select

Phone Status

and confirm.

Use the key to navigate in the menu and select the desired status infor-
mation (e. g.

Error Messages

)

Confirm the selection. The information is displayed.

Forum IPhone 5025/5030
1.

In the device menu, select

Status

and confirm.

Use the key to select the desired status information (e. g.

Error

Messages

). The information is displayed.

Forum IPhone 5040
1.

In the device menu, press the

Status

icon.

Press the desired icon (e. g.

Error Messages

). The information is displayed.

Summary of Contents for 5025

























































































































































































































Search results

Summary of Contents for 5025

Reviews:

Proximus 5025, User Manual, Page: 103 / 216

Search results

Summary of Contents for 5025

Reviews: