Proxima C550X Manual Download Page 9

Page: 9 / 83

Part names and functions

Side Control and Indicators

①

POWER

Turn on/off the projector.

②

AUTO

Perform various settings configured

automatically, including the "Input search",
"Auto PC adj." and "Auto keystone".

③

MENU

Open or close the screen menu.

④

ESC

Return to the previous menu.

⑤

INPUT

Select an input source.

⑥

▲▼◄►

/UP/DOWN/VOL+/VOL-

- Select an item or adjust the value in the
screen menu.
- Pan the image in the D. Zoom +/- mode.
- Increase or decrease volume.

⑦

KEYSTONE

Correct the keystone distortion.

⑧

- Enter menu operation.
- Execute the selected item.

⑨

WARNING

- It flashes red when the internal projector
temperature is beyond the operating
temperature range.
- It lights red when the power supply of the
projector is abnormal.

⑩

LAMP

- It turns yellow when the life of the projection
lamp draws to an end.

⑪

POWER

- It lights red when the projector is in stand-
by mode.
- It lights green during normal operations.

- It flashes green in the Power management

mode.

- It flashes red during fans cooling.

①

③

⑤

⑥

②

⑨

⑩

⑪

④
⑧

⑦

Summary of Contents for C550X




















































































Search results

Summary of Contents for C550X

Reviews:

Related manuals for C550X

Brands by name

Popular brands

Proxima C550X, Manual

Search results

Summary of Contents for C550X

Reviews:

Related manuals for C550X

Brands by name

Popular brands