66
Indicator and projector state
Check the indicator to know about the state of projector.
* When the lamp reaches the end of its life, the LAMP indicator lights Yellow. In this case,
replace the lamp with a new one promptly.
Appendix
Indicator
State of projector
POWER
Green/Red
LAMP
Yellow
WARNING
Red
In power-off state (AC power cord not connected).
In standby state. Press POWER to power on the projector.
In normal working state.
Ready to be in standby mode, the projection lamp is being cooled,
or in the preparation display appears on the screen. Before you
power on the projector, you should wait till the lamp is cool enough
and the power indicator stops flashing.
In power management ready mode.
Internal temperature too high. can’t be powered on. When the
projector is cool enough, the temperature is restored to the normal
value and the power indicator is illuminated red, you can then power
on the projector.
Can’t be powered on because error is detected. You should unplug
the power cord. Then insert it again and power on the projector. If
the projector is powered off again, you should cut off the power and
contact the local distributor or repair center. In this case, stop the
projector. Otherwise, electric shock or fire may occur.
The service life of the lamp is over. You should replace it with a new
one in time.
Green
Red
Yellow
Off
Flash green
Flash red
