44
Expand
Keystone menu
This function is used to store or reset the
keystone correction when the AC power cord is
unplugged.
1 Press MENU button on remote control to
display screen menu. Press
button to
select "Expand", then press OK button.
2 Press
button to select "Keystone", press
OK button.
3
Press
button to select the item you want
to set, press OK button.
ENTER
Display
Color adjust
Setting
Expand
Info.
Adjust
Select
Back
Memory
Viewer
Keystone
Store
Keystone
H/V Keystone
Corner correction
Curved correction
Reset value
Keystone
Sets whether or not to keep the keystone
correction after turn off the projector or plug out
the power cord.
H/V Keystone
Adjust when the horizontal or vertical trapezoid of the projected image is distorted.
Store ..... The keystone correction will be kept when plug out the power cord or turn off the
projector.
Reset .... When "Standby mode" is set to "Eco", plug out the power cord or turn off the projecter,
the keystone correction will be canceled. When "Standby mode" is set to "Normal", plug
out the power cord, the keystone correction will be canceled; turn off the projector, the
keystone correction will be kept.
Keystone
Corner correction
Adjust when the four corners of the projected image are distorted.
Press▲▼◄►to adjust the item.
Note:
● The white arrows indicate that there is no correction.
● A red arrow indicates the direction of correction.
● An arrow disappears at the maximum correction.
Corner correction
Upper left
Upper right
Lower left
Lower right
Reduce the upper
width with
button.
Reduce the left
width with
button.
Reduce the right
width with
button.
Reduce the lower
width with
button.
