manualshive.com logo in svg

Proxim Symphony-HRF, Manual

Share
Download
Proxim Symphony-HRF Manual Download Page 26

26

Symphony-HRF Cordless USB Adapter

The Symphony-HRF Cordless USB Adapter is easy to install.

The USB Adapter has a built-in antenna so the antenna does not require
separate installation.  Also, the USB port powers the adapter so the USB
Adapter does not require a power cable.

The USB Adapter is shown in Figure 8 below.

Figure 8

Symphony-HRF Cordless USB Adapter

Follow these steps to install the Symphony-HRF Cordless USB Adapter:

1.

Shut down the computer.

2.

Place the USB Adapter on top of your desk, computer, or monitor.

3.

Connect the USB Adapter’s cable to one of the computer’s USB ports.  If
you cannot identify a USB port, refer to the documentation that came
with the computer for more information.

4.

Turn on the computer and refer to the software installation procedure
described in Chapter 4.

Summary of Contents for Symphony-HRF




















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands