manualshive.com logo in svg

Proxim ORiNOCO AP-8000, User Manual, Page: 167 / 178

Share
Download
Proxim ORiNOCO AP-8000 User Manual Download Page 167

Specifications

AP-8000 User Guide

167

Advanced Bridging Functions

Medium Access Control (MAC) Functions

* DFS is required for 802.11a APs certified in the ETSI, TELEC, FCC, and IC regulatory domains and operating in the middle frequency band.

When ACS is disabled, available channels are limited to those on the lower frequency band. 

Security Features

* Key lengths supported by 802.11a/4.9 GHz: 64-bit, 128-bit, and 152-bit.

Key lengths supported by 802.11b: 64-bit and 128-bit.
Key lengths supported by 802.11b/g: 64-bit, 128-bit, and 152-bit.

Feature

Supported by AP-8000 (Y/N)

IEEE 802.1d Bridging

Y

Roaming

Y

Protocol Filtering

Y

Multicast/Broadcast Storm Filtering

Y

TCP/UDP Port Filtering

Y

Blocking Intra BSS Clients

Y

Packet Forwarding

Y

Feature

Supported by AP-8000 (Y/N)

Automatic Channel Selection (ACS)

Y

Dynamic Frequency Selection (DFS)/Radar 
Detection (RD)*

Y

Wireless Service Shutdown

Y

802.11d Support

Y

Tx Power Control

Y

Wireless Multimedia Enchancements/Quality of 
Service (QoS)

Y

Broadcast Unique Beacon

Y

Feature

Supported by AP-8000 (Y/N)

RADIUS Profiles per VLAN

N

IEEE 802.11 WEP*

Y

MAC Access Control

Y

RADIUS MAC-based Access Control

Y

IEEE 802.1x Authentication

Y

Wi-Fi Protected Access (WPA)/802.11i (WPA2)

Y

Summary of Contents for ORiNOCO AP-8000



















































































































































































Reviews:

No comments