Proxim ORiNOCO AP-8000, User Manual, Page: 145 / 178

Using CLI to Manage the Access Point AP-8000 User Guide
145
Monitoring the Device Using CLI Commands
Event Log Configuration
To view and configure Event Logs, use the following commands.
(config-monitor-eventlog)# priority warning
(config-monitor-eventlog)# reset yes
Show command:
System Name# show monitor event-log
// RUNNING-CONFIGURATION //
// EventLog Configuration //
eventlog {
priority: critical
log-reset: 0
}
SNTP Configuration
To configure Simple Network Time Protocol (SNTP), use the following commands.
(config-monitor)# sntp
(config-monitor-sntp)# day-light-savingtime unchanged
(config-monitor-sntp)# primary-server-name time.nist.gov
(config-monitor-sntp)# secondary-server-name string
(config-monitor-sntp)# sntp-status disable
(config-monitor-sntp)# time-zone dateline
Show command:
System Name# show monitor sntp
// RUNNING-CONFIGURATION //
// SNTP Configuration //
sntp {
status: disable
primary-server: time.nist.gov
secondary-server:
time-zone: dateline
daylight-saving-time: unchanged
current-time: 01-01-1970 0:29:05
}
System Log and System Log Host Configuration
To view and configure Syslog and System Log Host, use the following commands.
(config-monitor)# syslog
(config-monitor-syslog)# priority emergency
(config-monitor-syslog)# status enable
(config-monitor-syslog)# host-table
(config-monitor-syslog-host<tbl>)# index 0 row-status createAndGo
(config-monitor-syslog-host<tbl>)# index 0 ipaddress 10.0.0.1
(config-monitor-syslog-host<tbl>)# index 0 port 80