Proxim ORiNOCO AP-8000, User Manual, Page: 142 / 178

Using CLI to Manage the Access Point AP-8000 User Guide
142
Show command:
# show management system management
// RUNNING-CONFIGURATION //
// System Management Configuration //
system-management {
Config-change-count: 1
Commit: 0
Restore: 0
Error messages: Configuration Saved Successfully,Please Reboot to affect it.
Reboot: 0
Factory-reset: 0
}
Country Code Configuration
To configure Country Code parameters, use the following commands.
(config-mgmt-sys)# ?
Possible completions:
country-code System Country Code
exit Exit from configure mode
management System Management
system-information System Information
(config-mgmt-sys)# country-code BE
Show command:
System Name# show management system information
// RUNNING-CONFIGURATION //
// System Information Configuration //
system {
description: System Description
country-code: BE
OID: 1.3.6.1.4.1.841
uptime: 0-02:09:24.39
name: System Name
contact-mail: name@Organization.com
phone-number: Contact Phone Number
location-name: System Location
gps-longitude: -121.8893
gps-latitude: 37.3321
gps-altitude: 10
productdescr: ORiNOCO AP-8000 @ WD v1.0.0 SN-08UT41110039 v2.0.0(303290)
}
Inventory Management
The commands for Inventory Management are read-only and hence there is no configuration required.
Show command:
System Name# show management system inventory-mgmt
// RUNNING-CONFIGURATION //
// System Inventory Management Table //