10.1.2 VGA
You can also connect an external device with the Prowise Touchscreen via VGA cable. Please note: this only
enables a video connection. Add an audio signal by plugging in a 3.5mm jack (stereo) in the Audio in port.
1.
Connect a VGA cable to the VGA port of the external PC and the VGA port of the touchscreen.
2.
Once all cables are connected, switch on the touchscreen and the external device.
3.
As soon as the touchscreen and the external PC have booted up, navigate to ‘Input’ in the Central menu
and select the VGA source.
10.1.3 DP
You can also connect an external device to the Prowise Touchscreen via a DP port
1.
Connect a cable to the DP port of the external PC and to the DP input of the touchscreen.
2.
Once the cables have been connected, switch on the touchscreen and the external PC.
3.
As soon as the touchscreen and the external PC have booted up, navigate to ‘Input’ in the Central menu
and select the source.
10.1.4 AV
The composite video signal is a signal that emits transmits both video and audio. You can connect the composite
video with the Prowise Touchscreen with a 3.5mm Jack plug (Male with 3 rings) in the AV in port (Audio L, Audio
R and Video)
10.1.5 USB-C
The fully functional USB-C port at the front of the screen has multiple functionalities. This port can be used for
visuals, sounds, touch, data and transferring a 15W electric current. The USB-C port at the side of the screen can
support a 60W electric current, enough to charge your laptop. Connect your device to this port with a USB-C
cable to get started straight away with only one cable.
www.prowise.com
39 / 44
