
16
1) Verify that your battery is in good condition and can
provide a minimum of 650 CCA.
2) Install the supplied battery leads (long red lead from
control box = Positive / separate long black lead = Negative)
directly to the battery location, ensure that the cable is
protected throughout its run from heat and abrasion against
sharp components.
3) Connect the negative battery lead to the winch motor
ground terminal (never use a chassis earth).
4) Connect the remaining cables from the control box to the
motor observing the colour coded boots on the cable and
corresponding colour coded collars on the motor terminals.
5) Ensure that the small ground wire from the control box
(this is the ground supply to the contactor) is connected to
the main battery fed ground terminal on the underside of the
motor (do not attempt to use a chassis ground).
6) When you are satisfied that all other connections are
correctly installed connect the battery leads to the battery (via
an isolator switch and overload cut out if being used).
4.3 ELECTRICAL INSTALLATION
(please refer to Fig. 4)
Installation
Fig. 4
Small Black Cable
Long Black Cable
Long Red Cable
Battery
Summary of Contents for PWTR Series
