Proware Fibre to SAS/SATA RAID Subsystem, User Manual

Page: 40 / 122

Fibre to SAS/SATA RAID Subsystem
40 User Manual
7. Turn the disk tray upside down. Align the four screw holes of the SATA disk drive
in the four Hole B of the disk tray. To secure the disk drive into the disk tray,
tighten four screws on these holes of the disk tray. Note in the picture below
where the screws should be placed in the disk tray holes.
NOTE: All the disk tray holes are labelled accordingly.
8. Insert the disk tray into the subsystem.
Tray Hole B