NAS System
User’s Manual
15
2.3.3 Rear View
1.
COM1 Serial Port
–The system has one COM1 serial port.
2.
Power Supply A, B
– Two power supplies PSU-A and PSU-B are located at the
rear of the NAS System.
3.
AC Power Input Socket
– Use this to plug in the power cable connected from
power source.
4.
VGA Port
– Use this to connect a VGA monitor.
5.
LAN Ports
–The system comes with two 10Gb Ethernet ports LAN0 and LAN1.
6.
LAN Port LED Indications
–There are two LEDs on each LAN port. Please refer
to the table below for the LAN port LED indications.
Dedicated IPMI LAN Port LED Indications
Activity / Link LED
Speed LED
Status
Description
Status
Description
Off
No Link
Off
10M bps connection or no link
Blinking Yellow
Data Activity
Yellow
100M bps connection
On
Link
Green
1Gbps connection