MZ-10A-2(IR) User Manual
3
1. General Instructions:
1.1 Safety Instructions:
Make sure to read the user manual before using the camera.
Always follow national and local safety codes during the installation.
Only qualified and experienced person can carry the installation and
maintenance for this camera.
Use reliable tools.
Make sure that the environmental conditions meets the installation
requirements for this product.
Please check the space and toughness of the installation surface before
installation. It should be able to bear 4 times the weight of the camera
and its accessories.
1.2 Warnings:
Do not install this speed dome in hazardous places where combustible
or explosive materials are stored or used.
Do not install on platform that suffers from constant vibrations.
Make sure no object or fluid substances get inside the unit.
This speed dome runs on DC12V, do not connect it to different voltage.
Do not turn power on before installation is complete.
Do not disassemble any part of the camera.
Use soft towel to clean the down the lenses when necessary, do not use
caustic detergent.
To protect the image sensor, avoid facing the camera directly into
strong light.
To prevent damage, do not drop the unit or expose to strong shocks or
vibrations.
Make sure no object is blocking the unit’s full range of motion.
Summary of Contents for MZ-10A-2(IR)
Page 1: ......
Page 6: ...MZ 10A 2 IR User Manual 5 2 3 Specifications ...
Page 7: ...MZ 10A 2 IR User Manual 6 ...