Provision ISR MZ-10A-2(IR), User Manual, Page: 18 / 25

MZ-10A-2(IR) User Manual
17

< CONTRAST >: Changing the contrast value.
 <
ZOOM
>: Do Not Change.

< BLC >: switching OFF/ON.

< FOCUS >: Do Not Change

< Z-RANGE >: Do Not Change

< F-RANGE >: Do Not Change
 <
RESET
>: Reset All settings to factory Default
APPENDIX I: DIP SWITCH SETTING
:
DIP Switch consists of 8 numbers from 1-8, use 8421 binary code, max 255
address. When the switch is in the “ON” position, the number from 1-8
corresponding to 1, 2, 4, 8, 32, 64, 128. For example, if you set 1, 3, 5, 7
switch to the “ON” position, the corresponding address will be
1+4+16+64=85, please refer to the blow details.
Sheet 1
（
1=ON, 0=OFF
）
Add SW-1 SW1-2 SW1-3 SW1-4 SW1-5 SW1-6 SW1-7 SW1-8
1 1 0 0 0 0 0 0 0
2 0 1 0 0 0 0 0 0
3 1 1 0 0 0 0 0 0
4 0 0 1 0 0 0 0 0
5 1 0 1 0 0 0 0 0
6 0 1 1 0 0 0 0 0
7 1 1 1 0 0 0 0 0
8 0 0 0 1 0 0 0 0
9 1 0 0 1 0 0 0 0
10 0 1 0 1 0 0 0 0