ProteOn XPR36, User Manual

Page: 68 / 288

ProteOn XPR36 System | Protocol Design
50
To reposition a step or step group:
• Drag it to the new location
To navigate the Protocol Steps list:
• Use the keyboard arrow keys or the arrow buttons located at the
top of the Protocol Steps listTo delete a step:
• Select it in the Protocol Steps list and click Delete at the top of the
Protocol Steps screen
Note: You can delete individual steps from a step group.
P
ROTOCOL
E
DITOR
The Protocol Editor panel is divided into the following three areas:
• Group — shows four step groups that you can drag into the
Protocol Steps list. Each group consists of two or more protocol
steps that are commonly used together
• Step — lists individual steps that you can drag into the Protocol
Steps list
• Protocol Steps list — shows protocol steps and step groups in
the order of execution
The following step groups can be dragged from the Group list.
Step Group Icon Description
Immobilization Includes Activate, Ligand, and Deactivate steps
Stabilization Includes stabilization of the sensor chip surface using a Blank
step and a Regenerate step
Interaction Includes an Analyte step and a Regenerate step
EVC Calibration Includes EVC Calibration steps