ProteOn XPR36, User Manual

Page: 62 / 288

ProteOn XPR36 System | Protocol Design
44
To delete racks or plates:
• Click Delete to remove a rack/plate from the sample panel
browser. A rack or microplate can be deleted only if no sample is
associated with it
Note: A single sample cannot be removed using this option.
To delete a single sample:
• On the Protocol Samples screen, select a sample and then click
Delete in the Racks/Plates settings group
Creating Protocol Steps from Sample
Panels
If a plate/rack is expanded, at least one sample panel is selected within it. If a
plate/rack is not expanded, then no sample panels are selected within it.
To create protocol steps from selected sample panels:
1. On the Protocol Samples screen, go to the Step Creation settings.
2. Select one or more sample panels, and click Create Steps on the
Samples screen to create a protocol step for each sample panel
selected and to add it at the end of the protocol.
To expand or collapse sample panels:
• On the Samples screen, select Collapse all or Expand all in the
Display tools area, or select Collapse unused