ProteOn XPR36, User Manual

Page: 141 / 288

Analyzing Data
123
V
IEWING
R
EPORT
P
OINTS FROM A
D
ATASET
Note that the analysis table displays the average of report point values for all
sensorgrams in a group. The average is calculated by adding the report point
values together and dividing them by the number of entries in the group. The
report point average appears above the report point column.
To view report points:
• Right-click anywhere in an analysis table to copy and expand or
collapse all of the data at once
I
MPORTING
R
EPORT
P
OINTS FROM
O
THER
D
ATASETS
You can import report point values from other datasets into a dataset table to
normalize the analysis data or to compare results. Only report point values
(not time or range) are imported into the table.
You cannot add report points to a signed analysis table or a signed dataset
table.
To import report points:
1. In the dataset table to which you want to add report point values,
choose Add report point in the Analysis menu. The Add Report Point
dialog box appears.
2. Select a dataset and a report point from the pull-down menus.
3. To add only a single step from a report point, select the step in the pull-
down menu. If you select only a single step, then the data for that step
are repeated for every step in the target database.
4. Type a name for the report point column in the New column name box.
5. Click OK.