Instruction Manual
ROOF LANYARD AZ800
Read carefully
the manual
before use
the equipment
FOR USE WITH RETRACTABLE TYPE FALL ARRESTER
Edition: 4en/2012-08-30
DEVICE MARKING (IDENTITY LABEL)
OPERATING LIMITATIONS
The AZ800 Roof Lanyard can be used only with the CR200 or CR300 - PROTEKT EN360 retractable type fall
arresters. Do not use on any other device and never use AZ800 when the PROTEKT EN360 is used at
vertical.
The set to be composed of the PROTEKT EN360 fall ar AZ800 Roof Lanyard may be used over similar
edges as follows: rolled steel profiles, wooden beams or clad, rounded roof parapet. In case of very cutting type
edge or free of burrs (such as unclad roof rusty steel girder or a sharp concrete edge) an edge protector should be
mounted.
SERIAL NUMBER
USER NAME
DATE OF MANUF.
DATE OF FIRST USE
DATE OF PURCHASE
MODEL AND TYPE OF EQUIPMENT
REF. NUMBER
PERIODIC EXAMINATION AND REPAIR HISTORY
1
2
DATE
REASON FOR
SERVICING/REPAIR
3
4
5
CONDITION OF DEVICE
AFTER SERVICING
NAME AND SIGNATURE
OF COMPETENT PERSON
NEXT
EXAMINATION
DATE
Producer:
PROTEKT, 93-403 LODZ, ul. Starorudzka 9, POLAND,
TEL: (48 42) 680 20 83, FAX: (48 42) 680 20 93, www.protekt.com.pl
IT IS THE RESPONSIBILITY OF THE USER ORGANISATION TO PROVIDE THE IDENTITY CARD AND TO FILL IN THE DETAILS REQUIRED. THE
IDENTITY CARD SHOULD BE FILLED IN ONLY BY A COMPETENT PERSON RESPONSIBLE FOR PROTECTIVE EQUIPMENT. THE IDENTITY
CARD SHOULD BE FILLED IN BEFORE THE FIRST USE OF THE EQUIPMENT. ANY INFORMATION ABOUT THE EQUIPMENT LIKE: PERIODIC
INSPECTIONS, REPAIRS, REASONS OF EQUIPMENT'S WITHDRAWN FROM USE SHALL BE NOTED. THE IDENTITY CARD SHOULD BE
STORAGED DURING A WHOLE PERIOD OF EQUIPMENT UTILIZATION. DO NOT USE THE EQUIPMENT WITHOUT THE IDENTITY CARD.
IDENTITY CARD
Notified body, at which the European certification was performed and which
supervises the production of the equipment:
APAVE SUDEUROPE SAS - BP 193 - 13322 MARSEILLE CEDEX 16 - FRANCE
- No. 0082
EN 354:2010
name (type) of the device
number of the manufacturing
series
month/year of manufacture
reference number
caution: read the manual
marking of the manufacturer
or distributor
number of European Standard
CE mark and number of notified body
inspecting the equipmentaccording to
the article 11 of Directive 89/686/EEC
DESCRIPTION
The
Roof Lanyard is a special category of personal equipment against falls from a height, especially intended for roof
work where risk of fall over an edge egsist.
The product conforms to EN354 standard and additionally
for horizontal use and drop over an edge, according to VG11 CNB/P/11.060 sheet. The product is described on the fig.1
AZ 800
was successfully tested
identity label
identity label
ø
8
mm
steel wire rope
ø
8
mm
steel wire rope
attachment loop
for connecting to EN360
retractable fall arrester
attachment loop
for connecting to EN360
retractable fall arrester
attachment element
for connecting to user’s harness
attachment element
for connecting to user’s harness
1.8m
Fig.1
COMISSION AND FIRST USE - after
unwrap the product should be inspected in conformity with the inspection
recomendationpointed in General Rules ... chapter. The Identity Card must be filled.
PERIOD
ICAL
INSPECTIONS -
after every 12 month of usage
annual inspection must be carried out by
according the detailed recommendation included in General Rules chapter.
The result of inspection must be
recorded in
product
Identity Card
s included below
.
STORAGE - the
AZ800 Roof Lanyard should be
stored
, in room
temperature
Before the
first
usage the product
must be stored in manufacturer package.
CLEANING - clean the
AZ800 with wet cloth.
Do not use any acid or basic solvents. After cleaning the
product may be
dried away from any fire
or source of
heat.
REPAIRS - it is strictly forbidden to make any repairs and modifications to the product yourself. Any repairs or
modification should be done by a autorised service/ person.
TRANSPORT
- the
AZ800 should
be transported in the package (for example: impregnated textile, foil bag or plastic,
steel box)
to
avoid moisture
,
mechanical and chemical or others defects .
a qualified
person
stored in loose packaging in well-ventilated dry rooms
and protected against dust, sharp objects, extreme temperatures and caustic substances.
TIME OF USE
Roof lanyard AZ 800 can be used for 5 years c
o
unting from a date of putting it into operation. After this period the
device must be withdrawn from use to carry out detailed manufacturer’s inspection.
The inspection can be carried out by: - manufacturer; - or person recommended by the manufacturer; - or company
recommended by manufacturer.
During this inspection will be established admissible time of use of roof lanyard till next manufacturer's inspection.
Roof lanyard must be withdrawn from use immediately and destroyed when it has been used to arrest a fall.
Only for use with EN360 PROTEKT retractable type
fall arresters, reference: CR200; CR300.
The lanyard length 1,8m.
ROOF LANYARD
Date of manufacture: mm/yyyy
AZ 800
Serial number: 0000000
EN 354:2010
