Protegus SK232LED – Brief User Guide
Keyboard overview
Alarm system arming / disarming
Alarm system ARM:
1.
Make sure all zones are not violated
(none of zone indicators are illuminated).
2.
Enter User code.
3.
Select the button of area to be activated.
4.
Press [
OK
] button.
5.
Exit the premises within time delayed.
Once the code is entered the ARM indicator
will flash for duration of exit time delay.
SLEEP mode activation:
(Premises perimeter is secured. Movement inside is
allowed. If you open the entrance door, the alarm will
actuate immediately):
1.
Press [
SLEEP
] button.
2.
Enter User code.
3.
Press the button of area to be activated.
4.
Press [
OK
] button.
5.
Do not open the exit door.
The SLEEP indicator will illuminate when SLEEP mode is
on.
STAY mode activation
:
(Premises perimeter is secured. Movement inside is
allowed. Any opening of entrance door enables time
delay during which you have to disarm the alarm):
1.
Press [
STAY
] button.
2.
Enter User code.
3.
Press the button of area to be activated.
4.
Press [OK] button.
The STAY indicator will illuminate when STAY mode is
on.
Alarm system DISARM:
1.
Press [
OFF
] button.
2.
Enter User code.
3.
Press the button of particular area you
wish to disarm.
4.
Press [
OK
] button.
When the alarm is disarmed the OFF
indicator must be illuminated, however the
arming mode indicators should be
extinguished.
For area status changing into the opposite one it is sufficient to enter User code and select the
preferred area.
To delete symbols or command entered, press button [ ].
Number indicators [1]-[32] match with 1-
32 zones.
Illuminated
– zone violated
Extinguished
– zone monitored
Flashing
– zone/user selected
Flashing intensively
– zone was violated.
1 area status indications
2 area status indications
Area control buttons
Function keys
Power indication
