background image

Inwall LCR Speakers can be used in any position of a home theater 

speaker system. A single Inwall LCR Speaker can be used for the 

front center channel, or a pair can be used for left and right in the 

front or rear of the system. 

Using as a Center Channel Speaker

Inwall LCR Speakers have been designed to blend seamlessly 

with all Proficient inwall and ceiling speakers. For center channel 

applications, install the Inwall LCR Speaker horizontally into the 

wall as close to the screen as possible. This most often means 

it will need to be installed just above or below the television. 

Vertically lining it up with the left and right speakers while not 

necessary, will improve the performance. (See Diagram 1)

Using as Front Left and Right Speakers

When using Inwall LCR Speakers for front left and right speakers, 

position them vertically with the tweeter towards the screen. Align 

them with the center of the screen for optimal results. (See Diagram 1)

The speakers should be placed so that they form an equilateral 

triangle. (See Diagram 2) If the speakers are positioned far away from 

the primary listening area, adjust the pivoting tweeters so they are 

pointed toward the primary listening area. 

Note: 

To avoid possible damage to the pivoting tweeters, read the 

section entitled 

“SPEAKER ADJUSTMENTS”

 in this manual prior to 

performing the tweeter adjustment.

SPEAKER PLACEMENT

Diagram 2:

Ideal Placement

A=B=C

Ideal

Listening

Zone

B

C

A

Left Speaker

Center Speaker

Right Speaker

TOP VIEW

Diagram 1:

Speaker Positioning

Before installing your speakers into the wall, you should consider 

the placement carefully, taking into account the location of

electrical, plumbing and other fixtures. 

Contact your Dealer for assistance if you are unsure of the best 

location for your particular listening environment.

INSTALLATION CONSIDERATIONS

Inwall LCR Speakers

IW655 • IW630 • IW555 • IW530 

OWNER’S MANUAL

Summary of Contents for iw630

Page 1: ... the tweeter towards the screen Align them with the center of the screen for optimal results See Diagram 1 The speakers should be placed so that they form an equilateral triangle See Diagram 2 If the speakers are positioned far away from the primary listening area adjust the pivoting tweeters so they are pointed toward the primary listening area Note To avoid possible damage to the pivoting tweete...

Page 2: ...the small hole at this angle will make drywall repair much easier using the piece cut out Once you have determined there aren t any obstructions in your desired mounting location start cutting the finished hole at a 90 angle to the wall surface 5 Add insulation If the area in the wall is not already insulated add an adequate amount of insulation material to loosely cover the back of the speaker If...

Page 3: ...damage may occcur For home theater use we recommend the following tips If the Inwall LCR Speaker is being used as a main front channel the tweeter should be angled towards the listener If the Inwall LCR Speaker is being used for a rear surround channel you may wish to pivot the tweeter away from the listener to achieve a more diffused sound Tweeter Adjustment The switch labeled TREBLE allows for 3...

Page 4: ...a new model is substituted a modification to the mounting surface may be required If mounting surface modification is required Proficient assumes no responsibility or liability for such modification Proficient will bear the cost of returning the repaired or replaced product to you freight prepaid All replaced parts and product become the property of Proficient Audio Systems The foregoing is your s...

Reviews: