Electric Water Pump with Controller
3
Set-Up
Attach the Handle
Attach the Pump Control to the Pump
Separate brass coupling. Apply Teflon tape onto threads and screw onto pump control and pump separately.
Then, using the bigger nut, screw together (in direction of arrow) the pump and pump control, keeping them
stationary.
Operation
Conditions
•
These pumps must be installed in a dry, well-ventilated place with an ambient temperature of no more than
40°C.
•
Fix the pump in place on a solid, flat surface using suitable bolts to avoid vibration.
•
The pump must be installed in a horizontal position to ensure that the bearings operate correctly.
•
The diameter of the intake pipe must not be smaller than that of the intake mouth.
•
If the intake height exceed 4 meters, use a pipe with a larger diameter.
