22
S-PARK
- rev. 1.1_06_2020
To lock the automation again, turn the handle anticlockwise: the two
symbols of the locked padlock have to be realigned.
Then turn the key of the lock clockwise to lock the rotation of the
handle, and remove the key from the barrell.
ATTENTION: put the boom in the same previous position.
In case of doubt, turn the power off , wait a few seconds and
turn the power on again.
DATE
NOTES
INSTALLER’S SIGNATURE
END USER’S SIGNATURE
8.3
Maintenance
In order to preserve the proper performance and safety of the barrier
over time, it is highly recommended to schedule a regular maintenance
plan with your installer and report any uncommon behaviors that
may require inspection.
In case of malfunctions, it is wise to contact the installer who installed
the barrier, rather than others.
End user may just keep clean photocells and the barrier on a regular
basis.
Regular maintenance service and repairings must be documented
by the installer while the end user shall keep them safe and available
for future reference.
Update the below spaces every time a new intervention is carried
out:
