protech PS3100 Series, User Manual

Page: 75 / 115

Chapter 4 Award BIOS Setup
PS3100 SERIES USER
′
S MANUAL
Page: 4-21
USB DEVICE SETTING:
The options for these items are found in its sub menu. By pressing the
<ENTER> key, you are prompt to enter the sub menu of the detailed options
as shown below:
Phoenix – Award CMOS Setup Utility
Onboard Device
Item Help
USB 1.0 Controller
USB 2.0 Controller
USB Operation Mode
USB Keyboard Function
USB Mouse Function
USB Storage Function
*** USB Mass Storage Device Boot
USB Flash Disk 2.00
[Enabled]
[Enabled]
[High Speed]
[Enabled]
[Enabled]
[Enabled]
Setting ***
[Auto mode]
Menu Level ►
↑↓→←
:Move Enter: Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5: Previous Values F6:Fail-Safe Defaults F7:Optimized Defaults
Descriptions on each item above are as follows:
1. USB 1.0 CONTROLLER:
This should be enabled if your system has a USB installed on the
system board and you want to use it. Even when so equipped, if you
add a higher performance controller, you will need to disable this
feature.
2. USB 2.0 CONTROLLER:
Enable the USB 2.0 controller.
3. USB OPERATION MODE:
This item allows the user to decide USB device operation mode.
4. USB KEYBOARD FUNCTION:
Select Enabled if your system contains a Universal Serial Bus (USB)
controller and you have a USB keyboard.
5. USB MOUSE FUNCTION:
Select Enabled if your system contains a Universal Serial Bus (USB)
controller and you have a USB Mouse.