Protech Systems PA-8225, User Manual, Page: 77 / 247

Chapter 3 Software
PA-8225 SERIES USER
’
S MANUAL
Page: 3-14

All buffer data is deleted after printing.

The print area set by ESC W (Set print region in page mode) is reset to the
default setting.

No paper cut is executed.

Sets the print position to the beginning of the next line after execution.

This command is enabled only in page mode.
CR
[Name] Print and carriage return
[Format]
ASCII CR
Hex. 0D
Decimal 13
[Range] N/A
[Description]
When an automatic line feed is enabled, this command functions in the same
way as LF(print and line feed). When the automatic line feed is disabled, this
command is ignored.

This command is ignored with serial interface models.

Sets the print position to the beginning of the next line after execution.
CAN
[Name] Cancel print data in page mode
[Format]
ASCII CAN
Hex. 18
Decimal 24
[Range] N/A
[Description]
Deletes all print data in the currently set print region in page mode.

This command is enabled only in page mode.

Portions included in the currently set print region are also deleted, even if
previously set print region data.
DLE EOT n
[Name] Real-time status transmission.
[Format]
ASCII OLE EOT n
Hex. 10 04 n
Decimal 16 4 n
[Range] 1
≤ n ≤ 4
[Description]
Transmits the selected printer status specified by n in real time, according to the
following parameters:
n = 1 : Transmit printer status. n = 2 : Transmit off-line status.
n = 3 : Transmit error status. n = 4 : Transmit paper roll sensor status.