Protech Systems PA-8225, User Manual, Page: 75 / 247

Chapter 3 Software
PA-8225 SERIES USER
’
S MANUAL
Page: 3-12
Two-dimensional Bar Code Commands
Control
Codes
Hexadecimal
Codes
Function
Standard
Mode
Page
Mode
<DC2 ;> 12 3B Specifies a module size of QR Code and
Data Matrix
V V
<GS p 1> 1D 70 01 Prints QRCode data based on the specified
contents
V V
Kanji Control Commands
(when the Japanese, Simplified Chinese, Traditional Chinese, or Korean
model is used)
Control
Codes
Hexadecimal
Codes
Function
Standard
Mode
Page
Mode
<FS !> 1C 21 Set print mode(s) for Kanji characters
V V
<FS &> 1C 26 Select Kanji character mode
V V
<FS -> 1C 2D
Turn underline mode on/off for Kanji
characters
V V
<FS .> 1C 2E Cancel Kanji character mode
V V
<FS S> 1C 53 Set Kanji character spacing
V V
<FS W> 1C 57
Turn quadruple-size mode on/off for Kanji
characters
V V
Command classification
Executing : Printer executes the command, which does not then affect the following data.
Setting : Printer uses flags to make settings, and those settings affect the following data.
○: Enabled.
◎
: Enabled only when the command is set at the beginning of a line.
●: Enabled only when data is not present in the printer buffer.
▲: Only value setting is possible.
Disabled: Parameters are processed as printable data.
Ignored: All command codes including parameters are ignored and nothing is executed.