Protech Systems PA-8225, User Manual, Page: 169 / 247

Chapter 3 Software
PA-8225 SERIES USER
’
S MANUAL
Page: 3-106
3-4-4-5. IDE Configuration
IDE Configuration Screen
BIOS Setting Options Description/Purpose
Serial-ATA
Controller(s) - Disabled
- Enabled Enable or disable SATA Device.
SATA Test
Mode - Disabled
- Enabled Enable or disable SATA Test Mode.
SATA Speed
Support - GEN1
- GEN2

Gen1 mode sets the device to 1.5 Gbit/s speed.

Gen2 mode sets the device to 3 Gbit/s speed
(in case it is compatible).
SATA Mode - IDE mode
- AHCI mode Configures SATA as follows.

IDE: Set SATA operation mode to IDE mode.

AHCI: SATA works as AHCI (Advanced
Host Controller Interface) mode for getting
better performance.
SATA Port
0(Note*1) - Disabled
- Enabled Enable or disable SATA port 0 Device.
SATA Port 0 - Disabled Enable or disable SATA port 0 Device HotPlug