Protech Systems BA-2501 User Manual Download Page 100

Page: 100 / 146

Chapter 5 BIOS Setup

BA-2501 SERIES USER MANUAL

Page: 5-23

BIOS Setting

Options

Description/Purpose

- ECP Mode

- ECP and EPP 1.9 Mode

- ECP and EPP 1.7 Mode

settings.

5.4.7 Advanced – Hardware Monitor

Menu Path

Advanced > Hardware Monitor

The

Hardware Monitor

allows users to monitor the health and status of the system

such as CPU temperature, system temperature, CPU fan speed, system fan speed and

voltage levels in supply.

Hardware Monitor Screen

BIOS Setting

Options

Description/Purpose

Smart Fan Mode

Configuration

Sub-Menu

Smart Fan Mode Selection

CPU Temperature

No changeable options

Displays the processor's temperature.

System Temperature

No changeable options

Displays the system temperature.

CPU Fan Speed

No changeable options

Displays CPU Fan speed.

System Fan Speed

No changeable options

Displays System Fan Speed.

Summary of Contents for BA-2501



















































































































































Search results

Summary of Contents for BA-2501

Reviews:

Related manuals for BA-2501

Brands by name

Popular brands

Protech Systems BA-2501, User Manual

Search results

Summary of Contents for BA-2501

Reviews:

Related manuals for BA-2501

Brands by name

Popular brands