PLM-8000 Operation Manual
5
3. Notes for Using the Instrument
(1) Do not strike or drop the instrument. Strong impact causes the instrument to be
damaged and malfunction. Handle the instrument carefully.
(2) Do not expose the instrument directly to sunlight or bright indoor lighting, as this may
affect the precise measurement of the instrument.
(3) When other devices are to be connected to the instrument, follow the guidance of the
suppliers of the devices.
(4) Be sure to keep the cover glass clean. If the cover glass is contaminated with dust or
foreign matter, the instrument may malfunction or perform inaccurate measurement.
(5) If you encounter any abnormal condition, such as smoke, smell, or noise, when in use,
pull out the power cord immediately, and then follow the guidance of the supplier.
(6) Never use an organic solvent, such as alcohol, thinner, benzene, etc., to wipe the
exterior. It may ruin the surface of the instrument.
(7) When the PLM-8000 is to be moved, be sure to confirm that the power switch is
turned OFF. Then, move the instrument while holding the lower part of the main body
with both hands.
(8) When the PLM-8000 is not used at the long time, please turn off the power and put
the dust cover.
(9) Environment conditions.
In use
Temperature : +10
℃
~ +40
℃
Humidity : 30% ~ 90% RH
Pressure : 80 ~ 106 kPa
In storage
(non packaging)
Temperature : -10
℃
~ +55
℃
Humidity : 10% ~ 95% RH
Pressure : 70 ~ 106 kPa
In transport & storage
(packing)
Temperature : -40
℃
~ +70
℃
Humidity : 10% ~ 95% RH
Pressure : 50 ~ 106 kPa
NOTE
“
In storage(non packaging)
”
state is as follows;
Specimen unprotected, ready for operation, power supply not
connected
