RDM0012 Issue 1 AA
Page 32 of 35 © Protec Fire Detection PLC 2017
8.3
Event Category Enablement
It is possible to prevent certain event categories from displaying on the device. When a category is
disabled the device will not indicate or display any new events of that type.
A.
Starting from the beginning of the engineer menu, ‘Language’.
B.
Pressing the ‘Next’► button until the ‘Category Enablement’ menu is shown.
C.
Use the ‘Up’▲ and ‘Down’▼ buttons to scroll through the event categories. Then press
‘Select’● the enable or disable them.
D.
Back in access level 1, the icons of disabled categories will be greyed out to represent the
setting.
E.
Note: The device will save the new setting upon exiting the engineer menu.
A
B
C
D
