RLX-FHE, RLX-FHES, RLX-FHS
♦
RadioLinx FH
Diagnostics and Troubleshooting
Frequency-Hopping Industrial Radio
Page 82 of 151
ProSoft Technology, Inc.
November 25, 2008
One of the most common reasons radios do not communicate is an incorrect
setting in the "Send Data To" field in the Radio Configuration dialog box. Verify
that the radio is sending to and receiving from the correct radio ID.
If radios do not communicate, investigate some of the sources of interference
(page 30).
10.5 Query a Radio Directly
A radio can be queried so that it reports its settings to the Configuration PC.
Radios may be queried
directly
(through a cable connected to the Configuration
PC) or remotely (page 84) (through communication with the Master radio cabled
to the Configuration PC). If necessary, check (page 97) the serial port settings to
determine which COM port is configured for the network.
To directly query a radio (either Master or Remote), cable (page 44) the radio to
the Configuration PC. From the Setup/Application
Main Menu
, select:
Diagnostic
o
Radio
The Radio Parameters dialog box appears. Click the
Get Data
button to receive
data.
For Serial Radios:
Summary of Contents for RadioLinx FH Series
Page 6: ......
