RLX-FHE, RLX-FHES, RLX-FHS
♦
RadioLinx FH
Reference
Frequency-Hopping Industrial Radio
Page 122 of 151
ProSoft Technology, Inc.
November 25, 2008
Radio Type:
This is the radio type, for example "IFH Serial" or "IFH
Ethernet".
Repeater Antennas:
The number of repeater antennas for the radio, for
radios configured as repeaters.
15.1.17
Invalid Password Dialog Box
The Invalid Password dialog box opens when you enter the network password
incorrectly. Check the status of the Caps Lock key on your keyboard, and then
try entering the password again.
OK:
Click the OK button to save your selection and close the dialog box.
Help:
Click the Help button to read the online help for ControlScape.
15.1.18
IP Address Required Dialog Box
The IP Address Required dialog box opens when you choose Diagnostics (page
79) from the RadioLinx ControlScape main menu. Select the radio name and IP
address for a radio connected by cable to the Ethernet network.
Radio Name:
Select the radio name from the dropdown list.
IP Address:
Enter the IP address for the radio from the dropdown list.
OK:
Click the OK button to save your selection and close the dialog box.
Cancel:
Click the Cancel button to close the dialog box and discard your
changes.
15.1.19
Network Device IDs Dialog Box
The Network Device IDs dialog box opens when you click the View All Devices
button on the Associate Device IDs dialog box. Use this dialog box to view a list
of all device networks, radios and device IDs associated with this radio.
Radio Name:
Choose the radio name to associate with a device ID from the
dropdown list.
Add ID:
Click the Add ID button to add the selected Radio Name and Device
ID to the list of Network Device IDs.
Remove ID
: Select a radio to remove from the list, and then click the Remove
ID button.
Device ID:
Enter a device ID to associate with a radio name.
Master Device:
Select (check) this check box if this is a Master device.
Networked Device IDs:
This is a list of all device networks, radio names and
device IDs currently associated with the network.
OK:
Click the OK button to save your selection and close the dialog box.
Update Network:
To update all the radios simultaneously with the (new) IDs,
click the Update Network button. The program will then:
o
Communicate with the radio connected to the Configuration PC
o
Verify that all radios in the network are visible and can therefore be
updated
o
Update radios with the IDs in the Network Device IDs list
o
Indicate which radios were and were not updated
Summary of Contents for RadioLinx FH Series
Page 6: ......
