ProSoft ProLinx 104S, Protocol Manual

Page: 133 / 157

104S ♦ ProLinx Gateway Reference
(Firmware v3.00 and later) Protocol Manual
ProSoft Technology, Inc. Page 133 of 157
January 22, 2010
Process information in control direction
(Station-specific parameter, mark each Type ID ' X " if it is only used in the standard
direction, " R " if only used in the reverse direction, and " B " if used in both directions)
⌧
<45> := Single command C_SC_NA_1
⌧
<46> := Double command C_DC_NA_1
⌧
<47> := Regulating step command C_RC_NA_1
⌧
<48> := Set point command, normalized value C_SE_NA_1
⌧
<49> := Set point command, scaled value C_SE_NB_1
⌧
<50> := Set point command, short floating point value C_SE_NC_1
<51> := Bitstring of 32 bit C_BO_NA_1
⌧
<58> := Single command with time tag CP56Time2a C_SC_TA_1
⌧
<59> := Double command with time tag CP56Time2A C_DC_TA_1
⌧
<60> := Regulating step command with time tag
CP56Time2A C_RC_TA_1
⌧
<61> := Set point command, normalized value with
time tag CP56Time2A C_SE_TA_1
⌧
<62> := Set point command, scaled value with
time tag CP56Time2A C_SE_TB_1
⌧
<63> := Set point command, short float value with
time tag CP56Time2A C_SE_TC_1
<64> := Bitstring of 32 bit with time tag CP56Time2A C_BO_TA_1
Either the ASDUs of the set <45>-<51> or of the set <58>-<64> are used.
System information in monitor direction
(Station-specific parameter, mark " X " if used)
⌧
<70> := End of initialization M_EI_NA_1