ProSoft Technology RadioLinx RLXIB-IHW-66, User Manual, Page: 69 / 109

Share

Page: 69 / 109

ProSoft Technology RadioLinx RLXIB-IHW-66 User Manual Download Page 69

RadioLinx Industrial Hotspot Browser

RLXIB-IHW-66

♦

802.11a, b, g

User Manual

Industrial Hotspot

ProSoft Technology, Inc.

Page 69 of 109

May 18, 2009

5.4.3 Scan

List

This dialog box opens when you open the AP Dialogs menu and choose Scan
List.

The scan list is a list of all the radios that this particular radio "hears" on this
channel (via beacons) even if it is not linked to it (different SSID or encryption).
This list shows the same information as the Available Parents list in the Radio
Configuration / Diagnostic Utility.

List entries marked with a "*" indicate the entry is an alternate path, which can
also be seen if the ‘parents' button is selected in the menu bar (blue lines will link
the radio to its alternate parents).

802.11 Access Point Detector

The RLXIB Radio can be used as an installation tool to analyze the 802.11
environment and provide the user with information on choosing antenna location
and channel selection.

By using the table in the radio, you can mount an RLXIB Radio with its actual
antenna and use it to report information on every active 802.11 radio in the area.
It will report

Each 802.11 AP heard including SSID

Actual RSSI from each given in dBm

Channel of each radio

Use this information to help choose a channel that is least utilized, or to select
appropriate antenna types and alignments to minimize interference.

«
...
67
68
69
70
71
...
»

Summary of Contents for RadioLinx RLXIB-IHW-66














































































































Reviews:

No comments