Start Here
RLXIB-IHW-66
♦
802.11a, b, g
User Manual
Industrial Hotspot
ProSoft Technology, Inc.
Page 19 of 109
May 18, 2009
Radio Access Settings
If a DHCP (Dynamic Host Control Protocol) server is configured on your local
area network, the DHCP server can assign IP addresses automatically.
If you prefer to assign a Static (Fixed) IP address, select "Use the following IP
address", and then enter the IP Address, Subnet Mask and Default Gateway in
the Radio Access Settings area of the IH Radio web configuration form.
Important:
If you intend to assign IP addresses manually, you must not duplicate an IP address
that is already in use on your network. If you are not sure what IP addresses are available, ask
your network administrator for assistance.
1.6.6 Save the Radio Configuration
Before closing the Radio Configuration window, you must apply your changes.
Click Apply Changes to save your configuration and restart the radio.
Note:
To discard your changes and start over, click Cancel Changes.