PLX51-PBM
Setup
PROFIBUS DPV0/DPV1 Master or Slave to EtherNet/IP™ or Modbus® Gateway
User Manual
ProSoft Technology, Inc.
Page 59 of 196
3.9
Adding PROFIBUS DP Devices – Slave Mode
The user will need to add each PROFIBUS device to the PLX51-PBM, which can
then be configured. This is done by right-clicking on the
PROFIBUS Devices
item in
the tree and selecting
Add PROFIBUS Device
.
Figure 3.67
– Adding a PROFIBUS Field Device
When adding a PROFIBUS Device in Slave Mode, the user can select any of the
following devices to add:
Figure 3.68
– Selecting a PROFIBUS Field Device
Table 3.15
– Slave GSD Files
Module
GSD Filename
PLX51-PBM
PSFT10FE.GSD
ProLinx
PGWA05A5.GSD