Setup
Page 37 of 69
Within the PLX50 Configuration Utility environment, the module will be in the Online state,
indicated by the green circle around the module.
The module is now configured and will start operating immediately.
Figure 3.34 - Module online
3.7.
RSLOGIX 5000 CONFIGURATION
The PLX51-DF1-MSG modules can be easily integrated with Allen-Bradley Logix family of
controllers.
For Logix versions 20 and beyond, the modules can be added using the EDS Add-On-Profile
(AOP), which is described in section 3.7.1.
For older versions (19 and below), the module must be added using a Generic Profile which is
described in section 3.7.2.
3.7.1.
S
TUDIO
5000
C
ONFIGURATION
(V
ERSION
20+)
The Logix family in Studio5000 uses the EDS AOP. Before the module can be added to the
tree, the module’s EDS file must be registered.
Using RSLinx, the EDS file can be uploaded from the device. The EDS Hardware Installation
tool is then invoked to complete the registration.
Summary of Contents for PLX51-DF1-MSG
