Setup
Page 44 of 87
3.6.
MODULE DOWNLOAD
Once the DF1 configuration has been completed, it must be downloaded to the module.
Before downloading, the Connection Path of the module must be set. This path will
automatically default to the IP address of the module, as set in the module configuration. It
can be modified if the PLX51-DF1-ENI is not on a local network.
The Connection path can be set by right-clicking on the module and selecting the Connection
Path option.
Figure 3.41 - Selecting Connection Path
The new connection path can then be either entered manually or selected by means of the
Target Browser.
Figure 3.42 - Connection Path
