Reference MVI56-DH485R
♦
ControlLogix Platform
User Manual
DH485 Interface Module for Remote Chassis
ProSoft Technology, Inc.
Page 87 of 97
August 27, 2009
The following table lists the fields required for each record in the [DH485 Port x
Maps] section:
Field Definition
Database Start Address
This field defines the starting address in the module’s database for the
file emulation. This parameter can be assigned a value of 0 to 4999.
File Number
This field defines the file number to be emulated at the specified
database location.
Element
This field specifies the first element in the file to be emulated. This
element number corresponds to the database start address set for the
record.
Word Count (Length)
This field defines the number of word registers to be emulated in the
file.
5.7
File Override Map Definition Form
The following is a form for setting up the override map list:
Database Start
Address
File Number
Element Number
Word Count (Length)
