ProSoft Technology inRAx MVI56-BDW, User Manual

Page: 67 / 82

Reference MVI56-BDW ♦ ControlLogix Platform
BARDAC Drive Web Interface
ProSoft Technology, Inc. Page 67 of 82
September 4, 2008
Code Description
3 Illegal data value
6 Busy, reject
7 Negative acknowledge
10 Read-only variable
11 Index out of range
12 Invalid data type
13 Invalid variable address
14 Invalid modbus address
15 Connection not setup
16 Write-only variable
17 EEPROM write fail
0xFFFD Device not ready (initializing)
0xFFFE Device lock timeout (serious problem with device)
0xFFFF Unable to obtain device lock (device servicing other transaction)
Others Refer to drive manual or contact Bardac.
UDP Error Codes
Code Description
0xFFDF Could not find IP on network
0xFFDE Buffer for UDP socket could not be allocated
0xFFDC Command response timeout
Command List Entry Errors
Code Description
40 Too few parameters for command
41 Invalid type code
42 Invalid internal database address
45 Invalid function code
46 Invalid swap code
5.3 Cable Connections
The MVI56-BDW module has the following communication connections on the
module:
ƒ
One Ethernet port (RJ45 connector)
ƒ One RS-232 Configuration/Debug port (RJ45 connector)
5.3.1 Ethernet Connection
The MVI56-BDW module has an RJ45 port located on the front of the module
labeled "Ethernet", for use with the TCP/IP network. The module is connected to
the Ethernet network using an Ethernet cable between the module's Ethernet
port and an Ethernet switch or hub.