ILX69-PBS ♦ CompactLogix or MicroLogix Platform
Contents
PROFIBUS Slave Communication Module
User Manual
ProSoft Technology, Inc.
Page 95 of 102
April 27, 2016
Alarm Indication
DPV1 Alarm handling is an addition to the Device Diagnostics function in a PROFIBUS
message. Alarms are reported to the master as device-specific diagnostics information. The
slave initiates an Alarm Indication. Other than Device Diagnostics messages, Alarms must
be acknowledged by the master.
Start/Stop Communication
PROFIBUS communications can be started/stopped by using the "NRDY" (NotReady) Bit.
When this bit is set, the communication between the ILX69-PBS and all slaves is stopped.
All slaves will clear their outputs and the master will be in stop mode. This control bit allows
the user program to make a controlled start of the communication with the PROFIBUS
network.
9.2
Disposal of Electronic Equipment Waste
As a consumer, you are legally obliged to dispose of all electronic equipment waste
according to national and local regulations.
Waste Electronic Equipment
This product must not be treated as household waste.
This product must be disposed of at a designated waste electronic equipment
collecting point.
9.3
References
[1]
PROFIBUS DP Slave Protocol API Manual, Revision 19, Hilscher GmbH 2013
[2]
PROFIBUS DP Slave Protocol API Manual, Revision 15, Hilscher GmbH 2013
