ICX35-HWC ♦ Industrial Cellular Gateway
ICX35-HWC Tech Notes
3G/4G LTE
User Manual
ProSoft Technology, Inc.
Page 115 of 127
11
Click on the
VPN
link and select
O
PEN
VPN
from the
Client
drop-down list.
12
Enter the
TLS Renegotiation Time
in the appropriate field (see TLS).
13
Enter the OpenVPN server’s IP address in
Server IP
.
14
Enter the
Server Port
shown.
15
If user/password authentication is configured on the server, enable the
User/Password Authentication
box and provide credentials in the
User
and
Password
fields.
16
Choose and upload the
Credential Files
. Your Server Administrator will
provide you with the certificate files and location.
17
Click the
A
PPLY
button.
10.3.2
ICX35-2 Configuration
The
ICX35-2
is configured using the exact same procedure as the
ICX35-1
in this
example. Use the diagram as a guide to fill in the appropriate fields as described.
10.3.3
End Device Configuration
End devices must be configured based on the DHCP assignments. The
Gateway
settings must match the LAN IP of the ICX35-HWC. This must be done on both
ICX35-HWC radios.
When setting up
Ethernet Bridges
, set the IP address to the DHCP assigned
addresses.
