9
PRS-UM-DP32-EN-Rev.02-05.2019
Functions
The front panel has the following indicators as shown in Diagram 4:
Sign
Meaning
BATT
Main Power lost, Battery in operation
AUX
AUX ( assigned as ALARM1, ALARM2 or ALARM3*)
AL1
ALARM1
AL2
ALARM2
FAULT Fault condition in at least one of the detector
POWER 220 VAC Operate
ON
Operation LED for each detector (8 green LEDs)
FAULT Fault LED for each detector (8 yellow LEDs)
ALARM ALARM LED for each detector (8 red LEDs)
Table 2:
Front panel signs and meanings
There are four buttons nearby LCD screen to perform configuration and display the detector
details. Their functions are given in table (The key assignments may vary depending on the
menu page):
Key
Function For Configuration
Function For Display O
peration
MENU Enter to panel configuration
OK - Select key
UP
Go to upper menu option during configuration Go to the single channel details in normal operation
DOWN Go to lower menu option during configuration Page change on main screen
EXIT
Undo or exit from menu option
Reset on main screen
Table
3:
Panel
buttons
and functions
Diagram 8: Front panel signs LCD and LEDs
S-DP32 Panel has 32 LEDs numbered from1 to 32 nearby LCD panel. These LEDs will be
activated in case of an alarm to show which detector is raising the alarm. If any of these LEDs
are active it indicates the detector having that address has reached specified threshold level.
