21
PRS-UM-DP32-EN-Rev.02-05.2019
Relay Assignment:
The alarm relays work only in latched mode. Therefore, the relay will not be released and
stay in active mode till manual intervention. Even after environment is cleaned following an
alarm condition, the relay will stay active in latching mode. User should release them via
pressing the EXIT button for 2 seconds. Pressing the EXIT button will reset and stop alarms
temporarily. The control panel will perform measurement again when user released the EXIT
button. If gas measurement is still higher than given threshold levels alarms will be activated
again.
To change relay assignment press MENU button on main screen and select “Relay Assign”
option. The screen will display default working mode for all relays and assignment for AUX
relay:
Press MENU button to change AUX relay assignment. A cursor will be activated on the screen
and you can change assignment via using UP and DOWN buttons. Press EXIT button to save
assignment and return the screen. When AUX relay assigned to ALARM3, Digital Input port
will be activated on the panel. When AUX relay assigned to ALARM3, Digital Input port will
be monitored on the panel and AUX relay will be activated once the digital input activated by
external device.
Time Settings:
To change time and date press MENU button and select “Time Settings” option. A new menu
will be displayed including time and language options:
Press MENU button to adjust time. A new screen will display current time and date
information on the control panel.
Use UP, DOWN and MENU buttons to change value and move to the next item on the
screen. Once completed press EXIT button to return to settings screen.
