Page 1: ...Ti _RED OCTO Stand Models RB2710 RB3110 RB3510 The contemporary design of this stand and its companion TV models will complement the furniture iLnany room The stand gives you beautiful organized storage for your video and audio equipment ...
Page 2: ...e door over the pin on the top hinge If top bushing wM not stay In top hole place it on fop hinge 4 Insert the top hinge of the glass door into the top bushing If the bushing is resting on top of the hinge insert the hinge and bushing into the top hole Insert the bottom hinge into bottom hinge bushing and hold it in place while sliding bottom of glass door into hinge Then gently tighten bottom hin...
Page 3: ...ions for our specific TV model Your TV model determines which brackets you will use These dowels help keep the TV in place TV models designed for this stand have corresponding areas in the bottom of their cabinet that fit around these dowels Follow the directions below for model s PS27113 PS27123 PS27153 1 Attach the C brackets as shown in Figure 1 2 Insert the long end of the brackets G1 into the...
Page 4: ... Align the holes in the bracket F1 with the holes in the TV and top of the stand Insert the cabinet screw F4 into the top of the bracket F1 and tighten Insert the truss head screw F3 into the pre drilled hole from the bottom side of the stand and tighten with the wing nut F2 Figure 1 Single L Bracket TV Follow the directions below for model s PS35123 PS35153 TV Z Brackets o 2 t Atta_ h the Z brack...
