________________________________________________________________________________
9
–
Squeeze&Turn 19472-19479
5
Maintenance
5.1
Every day
T Wipe the attachment clean if it is dirty. Do not use water or pressure washers.
5.2
Every month, or as needed
Make sure the unit sounds normal when rotating and gripping.
Check that the bolts holding the attachment to the mast are correctly tightened.
Check the squeeze arms for any signs of deformation or cracks to the welds.
Check all electrical connections and replace damaged or worn parts.
If needed apply ball bearing grease to the internal parts of the squeeze mast.
Signs and decals
Check that the following signs and decals are attached and are fully legible.
Sign/decal
Description
Placement
Unit designation
Decal with serial number
One decal on the control box
and one decal on the
attachment
Instruction decal
Decal instructing the
operator
Front of the control box
Max load
Max load of the attachment Back of the attachment
