________________________________________________________________________________
12
–
Lift trolley Lift&Drive
325P+
5.2.11
Plates and decals
Verify that the following plates and decals are attached and fully readable.
Plate/decal
Description
Placement
CE Decal
Decal with CE mark and year
of manufacture
At the back of the cross-
member
Serial number
Decal with serial number
At the back of the cross-
member
Model
Decal with text stating the
model of the lift trolley
At the top on both the left and
the right side of the column
Maximum load
Decal with text stating the
maximum load and that
lifting people is not allowed
Clearly visible on the power
pack
No feet
Striped decal with an image
to warn against placing feet
on the wheel frame
On the wheel frame
(2 pcs)
Not for lifting people
Decal with image showing
that lifting people is not
allowed
On the cross-member
(2 pcs)
Safety information
Decal with text informing
about safety and contact
information
Clearly visible on the power
pack
5.3
Trouble shooting
The lift trolley is designed for safe and efficient operation, provided that routine maintenance is
carried out in accordance with the instructions given. If problems arise, some guidance is provided
below. If the problem persists after action has been taken
–
Please contact service technician or
Pronomic.
If the load carrier does not move at all, or very slowly:
•
Verify that the maximum load is not exceeded.
•
Charge the batteries.
•
Check that the battery charger works. A light should be visible on the charger when plugged
into the mains power.
•
Check if the fuse inside the power pack needs to be replaced.
