PRONAR T672ECO, User Manual

Page: 90 / 150

Chapter 4 Rules of use
4.20
PRONAR T672ECO
4.7 CHUTE GATE SERVICE
The rear wall of the load box is standard
equipped with a chute slide (1) - figure
(4.5) and additionally can be equipped
with a chute (2) for unloading loose ma-
terials. As an optional equipment, the rear
wall can be made in a version with two or
three chutes.
The chute design enables accurate dosing
ADVICE
Drawings describing the construction of the trail-
er show an example equipment configuration De-
tailed information on all options can be found in the
Equipment
chapter.
CAUTION
In the event of tipping backwards, insert and secure
the bolts in the rear sockets of the crate (II + III). In
case of tipping to the right side, insert and secure
the pins in the right crate seats (III + IV), while in the
case of tipping to the left side, insert the pins in the
left crates (II + I).
The tipping pin inserted and properly secured is
shown in figure (4.8): Handle down, pins hidden in
the socket.
619-H.07-1
I
IV
III
B
A B
II
A B
2
1
2
A A B
1
Figure 4.8 Locking of the tipping pins
(1) tipping pin I (left front or right rear), (2) tipping pin II (right front or left rear),